Pool Safety Compliant Fencing

Your timber pool fence external horizontal rails must have a 60 degree product such as Climb Stop! to create a non climbable surface.  At 68 degrees Climb Stop is over the required regulation recommended for pool compliance.

• Your pool fence & gate are less than 100mm off the ground
• The horizontal rails of your pool fence are less than 10mm apart to insure there are no footholds.
• The gaps between the verticals of your pool fence are less than 10mm wide
• Your pool has no climbable objects within 900mm distance from the outside fence including garden rocks, BBQ’s, pot plants, trees, furniture, etc.
• Your pool fence has no climbable objects within 300mm from the inside.
• Your pool fence is permanent and high quality with no damages including holes or broken rails
• Your pool gate opens outwards, opposite direction of your pool and works effectively closing by itself.
• Your pool must be registered with your local council.
• Your pool fencing must be at least 1200mm high (please measure your entire pool barrier to ensure this covers the full perimeter.)

Always check with you local pool compliance inspector for your regions pool fence regulations!

Note: For a full description of pool compliance regulations for your region visit your local Government Sites for further information.

QLD  |  NSW  |  VIC  |  TAS  |  SA  |  WA  |  NT   |  ACT